Brand: GRP4 FABRICATIONS
Model: GRP3667B
Stainless steel outer with rubber inner.DASH 8 BRAIDED FUEL HOSE (BLACK NYLON BRAID FINISH, RUBBER LINED)To suit our Dash 8 Rubber hose type fittings.Suitable for Oil and Fuel.Sold per Meter...
€44.28
Ex Tax:€36.00
-333x222.jpg "Diff Tunnel(chamfered)")
Brand: GRP4 FABRICATIONS
Model: GRP5310C
Diff tunnel (chamfered).
Used in conjunction with GRP5290C & GRP5360 ..
€30.41
Ex Tax:€24.72
Brand: GRP4 FABRICATIONS
Model: GRP1100
Front Wheel Bearing Kit (Standard Bearing) to Suir RS2000 / Capri Steel and Alloy Hubs
Front Hub Wheel Bearing kit to suit our Alloy Front Hubs with standard size outer Bearing.Not for use with our Modular front Suspension kit.Sold per Hub...
€51.45
Ex Tax:€41.83
-333x222.png "GRP4 HYDRAULIC CLUTCH SPACER RING 3mm")
-333x222w.png "GRP4 HYDRAULIC CLUTCH SPACER RING 3mm")
Brand: GRP4 FABRICATIONS
Model: GRP5700-3
GRP4 Clutch slave Cylinder mounting spacerThis GRP4 Manufactured spacer has dual sets of holes to mount either the Titan Slave Cylinder (GRP5724) or AP Slave Cylinder (GRP5795--CP6859-54)Can be used when extra height is required mounting the Titan or AP Racing Hydraulic Clutch assemblies.3 mm ..
€18.45
Ex Tax:€15.00
Brand: GRP4 FABRICATIONS
Model: GRP3121
HANDBRAKE ATTACHMENT KIT.
ALLOWS OUR HYDRAULIC HANDBRAKES TO BE MECHANICALLY OPERATED BY MEANS OF A CABLE.
SUPPLIED AS A KIT WITH 2.5M CABLES.
Compatible with:Alloy Hydraulic Handbrake UprightAlloy Hydraulic Handbrake HorizontalNot compatible with the ratchet handbrakes
(HANDBRAKE IN PICTURE SUP..
€78.14
Ex Tax:€63.53
Brand: GRP4 FABRICATIONS
Model: GRP4980
Hi Tensile steel in situ TCA adjuster.
3/4" UNF Left Hand Thread.5/8" UNF threaded Hole.As used in out GRP1030 Track Control arm kits...
€16.45
Ex Tax:€13.37
Brand: GRP4 FABRICATIONS
Model: GRP1110
Large outer bearing.
To suit Large bearing Alloy Front Hub.Not for use with our Modular front kit...
€23.39
Ex Tax:€19.02
-333x222.png "M24 X 1.5 LEFT HAND LOC NUT")
-333x222w.png "M24 X 1.5 LEFT HAND LOC NUT")
Brand: GRP4 FABRICATIONS
Model: GRP4833
M24 X 1.5 LEFT HAND LOC NUTAs used on our Heavy Duty Track control arm adjusters.Zinc Plated...
€2.90
Ex Tax:€2.36
Brand: GRP4 FABRICATIONS
Model: GRP1120LB
Alloy Grease Cap to suit our Alloy Hubs with Large outer Bearing.50.70mm Diameter...
€17.63
Ex Tax:€14.33
Brand: GRP4 FABRICATIONS
Model: GRP1120
Alloy Grease Cap to suit our Alloy Hubs with Standard outer Bearing.47.1mm Diameter..
€17.63
Ex Tax:€14.33
Brand: GRP4 FABRICATIONS
Model: GRP5130V
Chassis mounting kit to suit Vauxhall 2.0 XE engine.Allows the Engine to be mounted on the Chassis Legs of the Mk1 and Mk2 Escort thus allowing the Engine to be mounted as low and as far backward as possible which helps lower the center of Gravity.Another benefit is it also allows the Cross member a..
€98.03
Ex Tax:€79.70
