-333x222.png "COMPRESSION STRUT CONE AND BOLT TO SUIT ANTI ROLL BAR DROPLINK")
-333x222w.png "COMPRESSION STRUT CONE AND BOLT TO SUIT ANTI ROLL BAR DROPLINK")
Brand: GRP4 FABRICATIONS
Model: GRP1482
COMPRESSION STRUT CONE AND BOLT TO SUIT ANTI ROLL BAR DROPLINKThis Compression Strut cone is used when you wish to connect the anti roll bar drop link to the TCA as in the photo.Includes:1 x Compression strut cone to suit anti roll bar drop link1 x 3/8 UNF x 2" socket head bolt
..
€9.23
Ex Tax:€7.50
Brand: GRP4 FABRICATIONS
Model: GRP1480
Cone link assembly to suit our Compression Strut kits.Supplied with 3/8" unf x 1" socket head cap screw.
..
€25.83
Ex Tax:€21.00
-333x222.jpg "Gearbox Tunnel (60g Type)")
Brand: GRP4 FABRICATIONS
Model: GRP5301
Gearbox Tunnel.
Gearbox Tunnel designed to fit new Quaife 60 G gearbox.
used in conjunction with GRP 5360 and GRP5310C.Width at front 375mm.Height at front 410mm.Width at rear 150mm.Height at rear 280mm tapering down to 220mm...
€111.08
Ex Tax:€90.31
Brand: GRP4 FABRICATIONS
Model: GRP4965
Bilstein GRP4 rear shock bottom spacer.
Sold per shock.Total height 15.5mmShoulder height 10,,Outside Diameter 17.8mmSleeve Diamerter 14.9mmHole Diameter 12.7mm..
€6.77
Ex Tax:€5.50
Brand: GRP4 FABRICATIONS
Model: GRP5580/10
GRP4 Front Wheel Stud plus 10mm.High Tensile Wheel stud to suit front Wheel Hub.Used when using 10 mm Wheel Spacer or when using a Rear Brake Disc conversion kit.1/2" UNF Thread.Supplied with backing Nut.Total length 90mm.
..
€8.82
Ex Tax:€7.17
Brand: GRP4 FABRICATIONS
Model: GRP5580/15
GRP4 Front Wheel Stud plus 15mmHigh Tensile Wheel stud to suit front Wheel HubUsed when using 15 mm Wheel Spacer1/2" UNF ThreadSupplied with backing NutTotal length 95mm
..
€9.84
Ex Tax:€8.00
-333x222.png "M12 DOWTY WASHER *P")
-333x222w.png "M12 DOWTY WASHER *P")
Brand: GRP4 FABRICATIONS
Model: GRP4594M12
Dowty Washer / Bonded Seal with 12MM ID.DIMENSIONS:Connection - M12ID - 12mmOD - 18mmThickness 2mm
..
€0.64
Ex Tax:€0.52
Brand: GRP4 FABRICATIONS
Model: GRP4594M14
Dowty Washer / Bonded Seal with 14MM IDDIMENSIONS:Connection - M14ID - 14mmOD - 22mmThickness 2mm
..
€0.64
Ex Tax:€0.52
Brand: GRP4 FABRICATIONS
Model: GRP6715
Dowty Washer / Bonded Seal with M22 ID.Dimensions:Connection - M22ID - 22.5mmOD - 30mmThickness 2mm
..
€1.05
Ex Tax:€0.85
Brand: GRP4 FABRICATIONS
Model: GRP4216B
Alloy Shaped Fuel Injection Tank with Dry Break Fittings.GRP4 designed and manufactured Shaped 12 gallon Alloy Fuel tank specially designed with built in Swirl Pot (Guaranteed non Surge).Comes with Dash 8 feed and Dash 6 return threaded fittings, Sight gauge, Baffles, Breather and Twin Dry Break Fit..
€863.46
Ex Tax:€702.00
Brand: GRP4 FABRICATIONS
Model: GRP5130D
Chassis mounting kit to suit Duratec engine.Allows the Engine to be mounted on the Chassis Legs of the Mk1 and Mk2 Escort thus allowing the Engine to be mounted as low and as far backward as possible which helps lower the center of Gravity.Another benefit is it also allows the Cross member and Steer..
€98.03
Ex Tax:€79.70
-333x222.png "MK1 MK2 ESCORT CHASSIS MOUNTING KIT ZETEC")
Brand: GRP4 FABRICATIONS
Model: GRP5130Z
Chassis mounting kit to suit Zetec engine.Allows the Engine to be mounted on the Chassis Legs of the Mk1 and Mk2 Escort thus allowing the Engine to be mounted as low and as far backward as possible which helps lower the center of Gravity.Another benefit is it also allows the Cross member and Steerin..
€98.03
Ex Tax:€79.70
