GRP4 FABRICATIONS

Gearbox Tunnel. Gearbox Tunnel designed to fit new Quaife 60 G gearbox. used in conjunction with GRP 5360 and GRP5310C.Width at front 375mm.Height at front 410mm.Width at rear 150mm.Height at rear 280mm tapering down to 220mm...

Bilstein GRP4 rear shock bottom spacer. Sold per shock.Total height 15.5mmShoulder height 10,,Outside Diameter 17.8mmSleeve Diamerter 14.9mmHole Diameter 12.7mm..

GRP4 Front Wheel Stud plus 10mm.High Tensile Wheel stud to suit front Wheel Hub.Used when using 10 mm Wheel Spacer or when using a Rear Brake Disc conversion kit.1/2" UNF Thread.Supplied with backing Nut.Total length 90mm.  ..

GRP4 Front Wheel Stud plus 15mmHigh Tensile Wheel stud to suit front Wheel HubUsed when using 15 mm Wheel Spacer1/2" UNF ThreadSupplied with backing NutTotal length 95mm  ..

Dowty Washer / Bonded Seal with 12MM ID.DIMENSIONS:Connection - M12ID - 12mmOD - 18mmThickness 2mm  ..

Dowty Washer / Bonded Seal with 14MM IDDIMENSIONS:Connection - M14ID - 14mmOD - 22mmThickness 2mm  ..

Dowty Washer / Bonded Seal with M22 ID.Dimensions:Connection - M22ID - 22.5mmOD - 30mmThickness 2mm  ..

Alloy Shaped Fuel Injection Tank with Dry Break Fittings with Diff cutout as standard.GRP4 designed and manufactured Shaped 12 gallon Alloy Fuel tank specially designed with built in Swirl Pot (Guaranteed non Surge).Comes with Dash 8 feed and Dash 6 return threaded fittings, Sight gauge, Baffle..

Chassis mounting kit to suit Duratec engine.Allows the Engine to be mounted on the Chassis Legs of the Mk1 and Mk2 Escort thus allowing the Engine to be mounted as low and as far backward as possible which helps lower the center of Gravity.Another benefit is it also allows the Cross member and Steer..

Chassis mounting kit to suit Zetec engine.Allows the Engine to be mounted on the Chassis Legs of the Mk1 and Mk2 Escort thus allowing the Engine to be mounted as low and as far backward as possible which helps lower the center of Gravity.Another benefit is it also allows the Cross member and Steerin..

Rear coil over kit.Used when you wish to use a 2.25"coil spring on the Bilstein Rear Turret shock.Consists of 1 zinc plated threaded tube with Lock ring, Spring seat and Top Cap.Sold per Shock.  ID Ø 51.8mmOD Ø 57.1mmLenght 250mm  ..