GRP4 FABRICATIONS

Stainless Steel Exhaust mounting Bracket to suit our Universal Exhaust Systems.Laser cut and formed from 2mm Stainless Steel to give a strong but simple bracket to mount the Rear Silencer or Centre Pipe.Requires Welding to your Exhaust.75 mm Long.55 mm wide.Sold per Bracket...

Steel Release Bearing Carrier and Round Nose Bearing. Including 48mm external Circlip.To suit RS2000 Clutch fork on 4 speed or 5 speed (type 9) gearbox.  Bearing dimensions--Outer Diameter 68.40 mm.--Inner Diameter 38.1mm.--Height 19mm...

GRP4 Designed and manufactured Lightweight,Super strong black anodized aluminium pump Bracket Kit and filter mounting bracket. Supplied with Manifold and Double Banjo and bullet pre filter and all fittings.Billet machine alloy Black anodized.Designed for use with Twin Sytec 979 Pumps and Filter---So..

Front sleeve as used on our GRP6082 propshaft.As used on our ZF propshafts.To suit MK1 MK2 Escort ZF Historic Gearbox S5-18/3.38mm Nose diameter.27 Splines.Total length 173mm.Total width 82mm.Bore for UJ is 27mm.We ship worldwide...

Dowty Washer / Bonded Seal to suit 1/2" BSP fittings.Dimensions:Connection - 1/2" ID - 21.6mmOD - 28.5mmThickness 2.5mm  ..

Dowty Washer / Bonded Seal with 5/8" ID.Dimensions:Connection - 5/8" ID - 23mmOD - 31.8mmThickness 2.5mm  ..

Accelerator pedal cable block. Lightweight billet machined cable block for use with GRP3340 Grp4 Throttle Pedal. New split design to enable block to be positioned anywhere along accelerator pedal providing the optimum in pedal travel and feel. "No more heavy on/off type pedal"...

Breather Block for Side of Pinto Engine.Designed to take a 19mm ID hose...

 Alloy Front Hub Billet machined from 6082T6 aluminium (10mm wider that RS2000 hub) uses Large outer bearing and drilled to suit Standard Studs...

Stainless steel outer with PTFE inner with Black PVC finish.DASH 6 BRAIDED FUEL HOSE (BLACK PVC FINISH, TEFLON LINED)To suit our Dash 6 PTFE type fittings.Not suitable for use with Jubilee type fittings.Suitable for Oil and Fuel.PTFE Lined hose is recommended for fuel lines running inside the Cockp..

COMPRESSION STRUT CONE AND BOLT TO SUIT ANTI ROLL BAR DROPLINKThis Compression Strut cone is used when you wish to connect the anti roll bar drop link to the TCA as in the photo.Includes:1 x Compression strut cone to suit anti roll bar drop link1 x 3/8 UNF x 2" socket head bolt  ..

Cone link assembly to suit our Compression Strut kits.Supplied with 3/8" unf x 1" socket head cap screw.  ..