Brand: GRP4 FABRICATIONS
Model: GRP9119
Rubber Exhaust mount.Diameter 40 mm.Length 30 mm.M8 threads.Sold per mount...
€11.98
Ex Tax:€9.74
Brand: GRP4 FABRICATIONS
Model: GRP9117
Stainless Steel Exhaust mounting Bracket to suit our Universal Exhaust Systems.Laser cut and formed from 2mm Stainless Steel to give a strong but simple bracket to mount the Rear Silencer or Centre Pipe.Requires Welding to your Exhaust.75 mm Long.55 mm wide.Sold per Bracket...
€6.09
Ex Tax:€4.95
Brand: GRP4 FABRICATIONS
Model: GRP5940
Steel Release Bearing Carrier and Round Nose Bearing. Including 48mm external Circlip.To suit RS2000 Clutch fork on 4 speed or 5 speed (type 9) gearbox.
..
€70.45
Ex Tax:€57.28
Brand: GRP4 FABRICATIONS
Model: GRP4596
GRP4 Designed and manufactured Lightweight,Super strong black anodized aluminium pump Bracket Kit and filter mounting bracket. Supplied with Manifold and Double Banjo and bullet pre filter and all fittings.Billet machine alloy Black anodized.Designed for use with Twin Sytec 979 Pumps and Filter---So..
€235.42
Ex Tax:€191.40
Brand: GRP4 FABRICATIONS
Model: GRP6083
To suit MK1 MK2 Escort ZF Historic GRP4 S5-18/3 GearboxAs used on our ZF propshafts.38mm Nose diameter...
€71.34
Ex Tax:€58.00
-333x222.png "1/2\" DOWTY WASHER *P")
-333x222w.png "1/2\" DOWTY WASHER *P")
Brand: GRP4 FABRICATIONS
Model: GRP6717
Dowty Washer / Bonded Seal to suit 1/2" BSP fittings.Dimensions:Connection - 1/2" ID - 21.6mmOD - 28.5mmThickness 2.5mm
..
€1.05
Ex Tax:€0.85
Brand: GRP4 FABRICATIONS
Model: GRP6716
Dowty Washer / Bonded Seal with 5/8" ID.Dimensions:Connection - 5/8" ID - 23mmOD - 31.8mmThickness 2.5mm
..
€1.05
Ex Tax:€0.85
Brand: GRP4 FABRICATIONS
Model: GRP3350
Accelerator pedal cable block.
Lightweight billet machined cable block for use with GRP3340 Grp4 Throttle Pedal.
New split design to enable block to be positioned anywhere along accelerator pedal providing the optimum in pedal travel and feel.
"No more heavy on/off type pedal"...
€11.75
Ex Tax:€9.55
Brand: GRP4 FABRICATIONS
Model: GRP4507C
Genuine Aerocatch Bonnet Pin set.Carbon Non locking.Sold per Car set...
€136.33
Ex Tax:€110.84
Brand: GRP4 FABRICATIONS
Model: GRP4360P
Breather Block for Side of Pinto Engine.Designed to take a 19mm ID hose...
€23.39
Ex Tax:€19.02
Brand: GRP4 FABRICATIONS
Model: GRP1080LB/S
Alloy Front Hub
Billet machined from 6082T6 aluminium
(10mm wider that RS2000 hub)
uses Large outer bearing and drilled to suit Standard Studs...
€116.94
Ex Tax:€95.07
Brand: GRP4 FABRICATIONS
Model: GRP3666PV
Stainless steel outer with PTFE inner with Black PVC finish.DASH 6 BRAIDED FUEL HOSE (BLACK PVC FINISH, TEFLON LINED)To suit our Dash 6 PTFE type fittings.Not suitable for use with Jubilee type fittings.Suitable for Oil and Fuel.PTFE Lined hose is recommended for fuel lines running inside the Cockp..
€19.93
Ex Tax:€16.20
