GRP4 FABRICATIONS

GRP4 FABRICATIONS branded Cap in Blue with White Stitching.Features a pre-curved peak and a structured 5-panel design for a clean, classic look. Built with a heavy 250 g/m² cotton front panel and visor paired with a breathable polyester mesh back for optimal ventilation and comfort. Complete with an..

GRP4 Clutch slave Cylinder mounting spacerThis GRP4 Manufactured spacer has dual sets of holes to mount either the Titan Slave Cylinder (GRP5724) or AP Slave Cylinder (GRP5795--CP6859-54)Can be used when extra height is required mounting the Titan or AP Racing  Hydraulic Clutch assemblies.3 mm ..

GRP4 PANHARD AXLE BRACKET  ..

Large outer bearing. To suit Large bearing Alloy Front Hub.Not for use with our Modular front kit...

M24 X 1.5 LEFT HAND LOC NUTAs used on our Heavy Duty Track control arm adjusters.Zinc Plated...

Alloy Grease Cap to suit our Alloy Hubs with Large outer Bearing.50.70mm Diameter...

Alloy Grease Cap to suit our Alloy Hubs with Standard outer Bearing.47.1mm Diameter..

Chassis mounting kit to suit Vauxhall 2.0 XE or Opel 2.0 16V engine.Allows the Engine to be mounted on the Chassis Legs of the Mk1 and Mk2 Escort thus allowing the Engine to be mounted as low and as far backward as possible which helps lower the center of Gravity.Another benefit is it also allows th..

Mk2 Escort Boot Seal...

Front alloy Hub to suit our Modular Suspension kit.Sold per Hub...

Track Rod End Rose joint spacer to suit our GRP4 Modular Suspension kit. Suits a 3/8" bolt and fits into a rose joint with a 1/2" bore.Spacer width 6mmAs used in our GRP1799Mod kitSold each.  ..