Full

Watts linkage/Diamond 4 Link bracket rose joint spacer,To suit 1/2" bore Rose joint and 3/8 " bolt.Large Diameter 16mm.Small Diameter 12.7mm.Bore 3/8" or 9.6mm.Total height 10mm.Shoulder height = 4mm. ..

Breather Block for side of X-Flow Engine.Designed to take a 19mm ID hose.Engine block boss  23.9mm OD..

 Alloy Front Hub Billet machined from 6082T6 aluminium (10mm wider that RS2000 hub) Uses Large outer bearing and drilled to suit GRP4 Studs...

Stainless steel outer with rubber inner.DASH 8 BRAIDED FUEL HOSE(BSH-8) (STAINLESS BRAID FINISH, RUBBER LINED )To suit our Dash 8 Rubber hose type fittings.Suitable for Oil and Fuel.Sold per Meter...

Centre Tunnel (chamfered) - XL (265mm)80MM TALLER THAN STANDARD Centre Tunnel(chamfered) GRP5360 To be used in conjunction with  Gearbox Tunnel GRP5302C or GRP5302 or GRP5290C or GRP5301 and Diff Tunnel GRP5310C.Height 265mm. XLLength 880 mm.Width 150 mm...

Centre Tunnel. To be used in conjunction with  Gearbox Tunnel GRP5302C or GRP5302 or GRP5290C or GRP5301 and Diff Tunnel GRP5310C.Length 880 mm.Width 150 mm.Height 185mm...

In-situ Rubber bushed adjustable TCA kit allows the Camber to be adjusted on the Mk1 and Mk2 Escort without having to remove the Bolts on the Cross Member.The Rubber bushed kits are idea for Fast Road Mk1 and Mk2 Escorts where the Rose jointed type might be too Solid.The in-situ design allows for ve..

Chassis mounting kit to suit Pinto, BDA, Millington, KGP engines.Allows the Engine to be mounted on the Chassis Legs of the Mk1 and Mk2 Escort thus allowing the Engine to be mounted as low and as far backward as possible which helps lower the center of Gravity.Another benefit is it also allows the C..

MK2 Escort alloy Boot Hinges. Lightweight Alloy boot hinges finished in black powder coat. Assembled  with low friction PTFE Washers. Less than 1/2 the weight of the original steel brackets. Weighs only 625 Grams.Sold per pair.    ..

Mk2 Escort Pedalbox Clutch Cable Retainer Clip and Steel pin.Nylon Clip for holding Clutch Cable on to MK2 Escort Clutch Pedal.Selected used Original Ford item...

MK1 and MK2 Escort  Panhard fitting kit.Please Select Rose Joint Type:-Clubman:  1/2"bore 5/8"UNF Teflon lined Rod End with Spacers to suit. 10deg of movement, Ultimate Radial Static Load Capacity 10,500lbs -HD Type:  1/2"bore 5/8UNF Aurora XM8T Rod End with Spacers to suit. 10deg of ..

Standard Wheel Stud (Long).  M12*1.5 mm wheel stud. 12.7 mm diameter spline. (63 mm long).Also suit Honda civic...