GRP4 FABRICATIONS

Alloy front Hub kit to suit Talbot sunbeamThese Hubs are 10mm wider than Standard Steel hubs to accept Monte Carlo Brakes.Manufactured from High Grade Aluminium these Hubs are machined to accept M12 Studs and Wheel nuts.4 X 108 mm PCD Stud pattern.The Kit consists of:2 off Sunbeam alloy hubs +10mm -..

Talbot Sunbeam Front Wheel Bearing KitSold per HubKit consists of:1x Inner Bearing.    OD-50.3mm    ID-27mm1x Outer Bearing    OD-45.3mm    ID-19.05mm1x Oil seal    OD-60.3mm----2.375"    ID-44.5mm---1.75"Sold ..

Suzuki swift MK2 window kit. Our kits are manufactured with sliders, 211 x 195mm opening. We use only Grade A materials from our suppliers MACROLON & LEXAN.You can chose from either a clear or bronze tint, all in UV grade (does not detiorate with sunlight) All our kits come assembled with ..

Top Quality Sytec motorsport Fuel injection pump. Model number OTP 979.Inlet Thread M14 x 1.5mm.Outlet Thread M12 x 1.5mm.Maximum Flow: 282 Litres per hour.Maximum Pressure : 10.6 Bar.12v...

Sytec Fuel Pressure Gauge (0-15 PSI)Easily check and set your fuel pressure with this clear and accurate gauge from Sytec Motorsport. Designed for temporary use.Fits  directly onto Filter King fuel pressure regulators by replacing the brass plug (1/8th NPT). Ideal for non-fuel injected cars...

Sytec Regulator 473 with JIC 6 unions.Fuel Pressure RegulatorBrand: MalpassiAdjustable 1:5 Bar (22psi) - 6 Bar (90psi)Tested up to 10 BarFuel Pressure to Vacuum Ratio: 1:1Max Flow 5Ltrs/MinVacuum/Boost Connector: 1 x 5mm Tail on M6x1.0 threaded portCompatible with Alcohol-based Fuel (E85)Unions IN/O..

High Quality Cotton T shirt with printed GRP4 Logo.Colour Blue...

High Quality Cotton T shirt with printed GRP4 Logo.Colour grey...

High Quality Cotton T shirt with printed GRP4 Logo.Colour pink...

GRP4 Alloy Front Hub(Sunbeam) Billet machined from 6082T6 aluminium Drilled Ø12.5mm to suit GRP1 Studs.(10mm wider to accomodate Monte Carlo brakes)    ..

GRP4 Alloy Front Hub(Sunbeam) Billet machined from 6082T6 aluminium (10mm wider to accomodate Monte Carlo brakes)  Drilled Ø14.3mm to suit GRP4 Studs.  ..

Talbot Sunbeam Axle brace and clamps. 10mm axle brace to suit Sumbeam axle...