GRP4 FABRICATIONS

Steering end adaptor plus 2". High tensile steering rack extension for rose-jointing steering rack ends. M14 x 2.0 to 5/8"unf LH.120mm long...

Pinion adjustment kit to suit our GRP4 Steering Racks. includes:-top seal.-slipper pad.-spring .-seals/gaskets...

Steering rack extension. High tensile rack extension (Ideal for wide track front suspension using Ford TRE.(M14 x2mm threads). This will add a minimum 20 mm /side.Sold per side...

Steering Rack mounting rubbers and steel clamps to suit our GRP4 Heavy Duty Steering Racks. (This will not fit a genuine Ford steering rack)...

Steering Rack support plate and Screws.Prevents unnecessary side ways movement of rack on X member. Bolts onto Cross Member and Tack Welds onto Steering rack.Zinc plated.Kit consists of:1 off zinc plated Bracket3 off M16 x 16 Button head SHCS3 off M6 Nyloc nuts - GRP8005..

Mk2 strut top replacement panel Left side.To suit Small hole strut top.25-19-43-1..

Mk2 strut top replacement panel Right side.To suit Small hole strut top.25-19-43-2..

Sunbeam alloy front hub kit to suit GRP4 studs and GRP4 nutsThis hub has a +10mm offsetwith bearings,seals, GRP4 studs and nuts. alloy grease caps...

Alloy front Hub kit to suit Talbot sunbeamThese Hubs are 10mm wider than Standard Steel hubs to accept Monte Carlo Brakes.Manufactured from High Grade Aluminium these Hubs are machined to accept M12 Studs and Wheel nuts.4 X 108 mm PCD Stud pattern.The Kit consists of:2 off Sunbeam alloy hubs +10mm -..

Talbot Sunbeam Front Wheel Bearing KitSold per HubKit consists of:1x Inner Bearing.    OD-50.3mm    ID-27mm1x Outer Bearing    OD-45.3mm    ID-19.05mm1x Oil seal    OD-60.3mm----2.375"    ID-44.5mm---1.75"Sold ..

Suzuki swift MK2 window kit. Our kits are manufactured with sliders, 211 x 195mm opening. We use only Grade A materials from our suppliers MACROLON & LEXAN.You can chose from either a clear or bronze tint, all in UV grade (does not detiorate with sunlight) All our kits come assembled with ..

Top Quality Sytec motorsport Fuel injection pump. Model number OTP 979.Inlet Thread M14 x 1.5mm.Outlet Thread M12 x 1.5mm.Maximum Flow: 282 Litres per hour.Maximum Pressure : 10.6 Bar.12v...