Full

Handbrake pin and E Clips Ø8mm x 30mm long (total length)  Supplied with 2 E clips...

Handbrake pin and E Clips as used in our GRP3080 and GRP3090 Handbrakes.Ø8mm x 38mm long (total length)  Supplied with 2 E clips...

HAND BRAKE PIN 61MM AND E CLIPSØ8mm x 61mm long (total length)..

Alloy Clevis narrow type.40mm longDiameter 19mm5/16" unf thread8 mm hole 8mm wide slotBlack anodisedAs use on our MK1 and Mk2 Escort Hydraulic Pedalboxes..

HANDBRAKE CLEVIS WIDE TYPEAlloy Clevis narrow type.40mm longDiameter 25mm5/16" unf thread8 mm hole12mm wide slotBlack anodisedAs use on our GRP3080 Handbrakes..

HANDBRAKE ROSE JOINT5/16" unf Female Thread.5/16" Bore.Ball Width 11mmLenght form centre of bore to the end of thread 36mmTotal lenght 47.5mm..

Bump stop for the Bilstein Mk1 and Mk2 Escort Front Shock.For more than 50 years Bilstein has been developing dampers used in motorsport, and its name has been synonymous with the Mk1 and Mk2 Escorts.Bilstein has been winning on Mk1 and Mk2 Escorts since the 1970s and is still the brand to use today..

Bilstein Mk1 and Mk2 Escort rear coilover shock absorber.For more than 50 years, Bilstein has been developing high-performance dampers for motorsport, remaining the benchmark brand for the Ford Escort Mk1 and Mk2 since the 1970s.This Group 4 rear coilover shock allows the conversion from original le..

Bump stop for the Bilstein Mk1 and Mk2 Escort Rear Coilover Shock.For more than 50 years Bilstein has been developing dampers used in motorsport, and its name has been synonymous with the Mk1 and Mk2 Escorts.Bilstein has been winning on Mk1 and Mk2 Escorts since the 1970s and is still the brand to u..

GRP4 Alloy front Hub kit to suit Mk1 and Mk2 Escorts using Bilstein Type Struts.Manufactured from High Grade Aluminium these Hubs are machined to accept Large outer Bearing and GRP4 Wheel Studs.These GRP4 Hubs increase the Track Width by 10 mm per side.4 X 108 mm PCD Stud pattern.The Kit consists of..

Mk1 and Mk2 Escort Handbrake Cable to suit our GRP3681 Rear Disc conversion kit using the Cosworth Calipers.There will be a small amount of work required to fit this--some mounting points will need to be made on the body to hold the Cables...

Fitting kit for the Bilstein Mk1 and Mk2 Escort Rear Coilover Shock.For more than 50 years Bilstein has been developing dampers used in motorsport, and its name has been synonymous with the Mk1 and Mk2 Escorts.Bilstein has been winning on Mk1 and Mk2 Escorts since the 1970s and is still the brand to..