Full

16mm Rear anti roll bar bush.Made from polymer with a low coefficient of frictionTo suit the following kits: GRP2319-4LINK    ESCORT MK1 MK2 REAR 16MM ANTI ROLL BAR KIT 4 LINK TYPEGRP2319CHAS16  ESCORT MK1 MK2 REAR 16MM ANTI ROLL BAR CHASSIS TYPE  Length 35mmIDØ 16.5mmO..

REAR ANTI ROLL BAR CLAMPS/PAIRAs used in our GRP2319CHAS14 and GRP2319CHAS16 type rear Anti roll bar kits.Billet machined lightweight aluminium anodisedBolts onto the rear chassis Legs using GRP2315 Dimensions :50mm high76mm wide25mm thick10mm Holes--40mm between centresAnti Roll..

REAR ANTI ROLL BAR CLAMPS-84MM HIGH/PAIRAs used in our GRP2324-4 link and GRP2319-4 link  type rear Anti roll bar kits.Billet machined lightweight aluminium anodisedBolts onto the rear of the Long 4 link bracketsDimensions :84mm high76mm wide25mm thick10mm Holes--47mm between centresAnti Roll b..

REAR ANTI ROLL BAR AXLE CHASSIS BRACKET  Designed to mount onto the rear chassis rails as used in our GRP2319CHAS14 and GRP2319CHAS1690mm long x 50mm wide (inside dimension)Fitted with M10 threaded inserts 40mm between centresAlso used as the mounting plate for our Rear Tow eye...

Weld on bracket for mounting remote Oil Filter on inner wing.150mm x  60mm x 25mm high.2 off M8 threads 60mm between centres.Filter housing sold separately...

Lightweight Aluminium Clamps for Holding Reiger Canisters or any other 50mm Canister.Mounts easily onto the Rear alloy Axle brace on the Atlas axle. (95mm wide).Black anodised Aluminium.Fitted with non slip Liners to prevent Canister moving.Sold per 2 Brackets as in Picture.Height = 72mmWidth = 95mm..

MK2 alloy dash panel.Replaces original Ashtray panel. Tig Welded.Black powder coated finish.350mm in length...

35 mm CDS weld in seat fitting kit.Complete with floating nut brackets and side reinforcement plates.2 x 600 mm CDS pipe.Sold per Seat...

Seat Mounting Kit / Seat. 35 mm CDS bolt in seat fitting kit.Complete with floating nut brackets and Bolt in side reinforcement plates.2 x 600 mm CDS pipe.Sold per Seat...

3 Way Spare Wheel Strap.Adjustable 25mm wide black Webbing with Zinc plated Ratchet.Supplied with Load spreading Washers, Screws and backing plates...

Black anodized Alloy Housing with 3/4" (19.05mm) internal Spherical Bearing.2 off M8 threaded holes 80mm between centres. Ideal for Custom Power Steering modifications where you need extra an Bearing support in the front Bulkhead.Not required for GRP4 Fabrications manufactured Power steering kits.T..

Tarmac spec Tension Strut kit for the Mk1 and Mk2 Escort.Ideal for use with short Tarmac Struts.As used in the Works Ford Cars in the late 1970's and early 1980's.Tension Strut kits allow the adjustment of Castor and Camber when used in conjunction with adjustable Track control arms.A Castor angle s..