Full

Right hand side Quick release Steering bolt assembly to suit strengthened Steering arms.With mounting Hole for Wheel speed sensor.Makes the changing of Steering arms easier because the Wheel Hub does not need to be removed.Wheel speed sensor hole diameter 8.5mm.If nuts are needed please add from acc..

1 pair of Quick release Steering bolt assemblies to suit strengthened Steering arms and RS2000 Steering arm.Makes the changing of Steering arms easier because the Wheel Hub does not need to be removed.Sold in pairs.Locking nuts sold seperately...

2 x 8mm push on fittings.Threaded cap.Mounting bracket.Black anodized.Height: 180mm.Diameter: 100mm...

REAR 14MM ANTI ROLL BAR ALLOY STOP .Prevents the rear anti roll bar from sliding sideways on the mounting bracketsThis is to suit a 14mm bar.Fitted with 2 off M6 Grub screwsSold each..

14mm Rear anti roll bar bush.Made from polymer with a low coefficient of frictionTo suit the following kits: GRP2319-4LINK    ESCORT MK1 MK2 REAR 14MM ANTI ROLL BAR KIT 4 LINK TYPEGRP2319CHAS14  ESCORT MK1 MK2 REAR 14MM ANTI ROLL BAR CHASSIS TYPE  LengtH 35mmIDØ 14.5mmO..

REAR 16MM ANTI ROLL BAR ALLOY STOP .Prevent the rear anti roll bar from sliding sideways on the mounting bracketsThis is to suit a 16mm bar.Fitted with 2 off M6 Grub screwsSold each..

16mm Rear anti roll bar bush.Made from polymer with a low coefficient of frictionTo suit the following kits: GRP2319-4LINK    ESCORT MK1 MK2 REAR 16MM ANTI ROLL BAR KIT 4 LINK TYPEGRP2319CHAS16  ESCORT MK1 MK2 REAR 16MM ANTI ROLL BAR CHASSIS TYPE  Length 35mmIDØ 16.5mmO..

REAR ANTI ROLL BAR CLAMPS/PAIRAs used in our GRP2319CHAS14 and GRP2319CHAS16 type rear Anti roll bar kits.Billet machined lightweight aluminium anodisedBolts onto the rear chassis Legs using GRP2315 Dimensions :50mm high76mm wide25mm thick10mm Holes--40mm between centresAnti Roll..

REAR ANTI ROLL BAR CLAMPS-84MM HIGH/PAIRAs used in our GRP2324-4 link and GRP2319-4 link  type rear Anti roll bar kits.Billet machined lightweight aluminium anodisedBolts onto the rear of the Long 4 link bracketsDimensions :84mm high76mm wide25mm thick10mm Holes--47mm between centresAnti Roll b..

REAR ANTI ROLL BAR AXLE CHASSIS BRACKET  Designed to mount onto the rear chassis rails as used in our GRP2319CHAS14 and GRP2319CHAS1690mm long x 50mm wide (inside dimension)Fitted with M10 threaded inserts 40mm between centresAlso used as the mounting plate for our Rear Tow eye...

Weld on bracket for mounting remote Oil Filter on inner wing.150mm x  60mm x 25mm high.2 off M8 threads 60mm between centres.Filter housing sold separately...

Lightweight Aluminium Clamps for Holding Reiger Canisters or any other 50mm Canister.Mounts easily onto the Rear alloy Axle brace on the Atlas axle. (95mm wide).Black anodised Aluminium.Fitted with non slip Liners to prevent Canister moving.Sold per 2 Brackets as in Picture.Height = 72mmWidth = 95mm..