GRP4 FABRICATIONS

Mk1 Mk2 Escort Panhard Tower Kit (LH Exhaust)Please Select Rose Joint Type:Clubman:  1/2"bore 5/8"UNF Rod End with Spacers to suit. 10deg of movement, Ultimate Radial Static Load Capacity 10,500lbs HD Type:  1/2"bore 5/8"UNF Aurora XM8T Rod End with Spacers to suit. 10deg of movement, Ulti..

Mk1 and Mk2 Escort Pinto engine to Ford Gearbox Alloy Bellhousing.Fits Ford 4-speed RS2000, Rocket Gearbox and 5-speed Type 9.As fitted to original RS2000.Suitable for Right Hand and Left Hand Drive.Material: Lightweight aluminium.Quick-release type, which makes removal of the gearbox from the bellh..

Mk1 Mk2 Escort Pinto to ZF Gearbox Alloy Bellhousing.Quick release type, which makes removal of the gearbox from the bellhousing easier.Left hand Starter Motor.To suit Pinto Engine to ZF S5-18/3 model Gearbox.Can be used with external slave cylinder or Titan concentric slave cylinder.We ship worldwi..

Steel Protector skid designed to protect the Brake Pipe and fittings on the FF Axle during rough events.Suit CP7613 Caliper with 267mm Disc on FF Rear Axles.Fitted with M8 mounting nut.Sold per pair...

Alloy front Hub kit to suit Mk1 and Mk2 Escorts using Bilstein Type Struts.These Hubs are a direct replacement for the standard Steel RS2000 Hubs.Manufactured from High Grade Aluminium these Hubs are machined to accept Standard Studs and Wheel nuts.4 X 108 mm PCD Stud pattern.The Kit consists of:2 o..

Mk1 and Mk2 Escort Heavy duty standard type Gearbox mount/Cross Member.One piece Steel and Bonded Rubber construction.190mm x 34mm between mounting slot centres...

Gravel spec or Bumpy Irish Tarmac Tension Strut kit for the Mk1 and Mk2 Escort.As used in the Works Ford Cars in the late 1970's and early 1980's.Tension Strut kits allow the adjustment of Castor and Camber when used in conjunction with adjustable Track control arms.A Castor angle setting of +3.0 to..

Vauxhall 2.0 xe to 4/5 speed Ford Bellhousing.Zero degree type.Quick release Type , which makes removal of the Gearbox from the Bellhousing easier.Quick Fit Bellhousings have threads on the 4 bolt holes where the Bellhousing mounts to the Gearbox. This allows the Gearbox to be bolted to the Bellhous..

The Watts linkage kit is the most effective method to stop unwanted left to right movement of the Axle as the suspension moves up and down.These kits developed for the MK1 and Mk2 Escorts keeps the Axle perfectly centred at all times,providing more predictable and consistant handling.While a Watts l..

MK1 MK2 QUICK RELEASE ZF BELLHOUSING ACCESORIES KITTo suit BDA/BDG Engine to ZF  S5-18/3 model Gearbox,ZF Bellhousing sold separately.Consists off:1 of ZF Clutch fork pivot pin - GRP57301 of ZF release bearing carrier and bearing - GRP57801 of ZF Trumpet - GRP57201 of G..

MK1 MK2 QUICK RELEASE BELLHOUSING CYLINDER PUSH ROD KIT..