-333x222.png "HANDBRAKE ROSE JOINT")
-333x222w.png "HANDBRAKE ROSE JOINT")
Brand: GRP4 FABRICATIONS
Model: GRP3111
HANDBRAKE ROSE JOINT
5/16" unf Female Thread.
5/16" Bore.Ball Width 11mmLenght form centre of bore to the end of thread 36mmTotal lenght 47.5mm..
€9.38
Ex Tax:€7.63
Brand: GRP4 FABRICATIONS
Model: GRP5561
This kits follows the recommendations by HANS manufacturers of mounting the Harnesses at an angle between 0 and 20 degrees to the Horizontal.
The job of this kit is to span across(weld and bolt on) the two rear roll cage stays and provide a secure anchorage point for the harnesses while c..
€46.78
Ex Tax:€38.03
Brand: GRP4 FABRICATIONS
Model: GRP4423
HARNESS EYE.Harness eye with 7/16" unf thread.25mm Thread length...
€2.84
Ex Tax:€2.31
Brand: GRP4 FABRICATIONS
Model: GRP4424
Harness eye backing Plate.Used to firmly bolt your harness mounting eye bolts in position. These back plates, help spread any loads through a larger area of floor pan or panel they are mounted behind.Made from tensile steel and Zinc plated finish.Size 55 X 55 mm.7/16" UNF Thread...
€1.43
Ex Tax:€1.16
-333x222.png "HD TCA Adjuster")
-333x222w.png "HD TCA Adjuster")
Brand: GRP4 FABRICATIONS
Model: GRP4981
HD TCA ADJUSTER.
M24*1.5 LH external thread with 5/8 unf internal thread.
Total lenght 55mm.M24*1.5 LH external thread --45mm long5/8 unf internal thread --35mm longAs used in our GRP1074 range of Heavy duty Track Control arms..
€28.41
Ex Tax:€23.10
-333x222.png "HD TCA Adjuster+1")
-333x222w.png "HD TCA Adjuster+1")
Brand: GRP4 FABRICATIONS
Model: GRP4981PLUS1
HD TCA ADJUSTER +1inch.M24*1.5 LH external thread with 5/8 unf internal thread.Total length 80mm.M24 External thread length --45mm long5/8 unf internal thread length --30mm longAs used in our GRP1074 range of Heavy duty Track Control arms..
€31.12
Ex Tax:€25.30
-333x222.png "HD TCA Adjuster+2")
-333x222w.png "HD TCA Adjuster+2")
Brand: GRP4 FABRICATIONS
Model: GRP4981PLUS2
HD TCA ADJUSTER +2inch.
M24*1.5 LH external thread with 5/8 unf internal thread.
Total length 105mm.M24*1.5 LH external thread lenght-- 45mm long5/8 unf internal thread length-- 35mm longAs used in our GRP1074 range of Heavy duty Track Control arms..
€33.83
Ex Tax:€27.50
Brand: GRP4 FABRICATIONS
Model: GRP3884b
MK1 & MK2 Heater control switch panel.Lightweight Alloy Switch panel which mounts where the original Heater controls are.Angled towards the driver to allow for clear view and reach of Switches and Gauges.TIG welded and Black Powder coated.Dimensions 280 x 75mm...
€43.30
Ex Tax:€35.20
Brand: GRP4 FABRICATIONS
Model: GRP3884
MK1 & MK2 heater control switch panel.
Angled switch panel which mounts where the original Heater controls are.
Tig welded.Dimensions 280 x 75mm.Aluminium finish...
€35.52
Ex Tax:€28.88
Brand: GRP4 FABRICATIONS
Model: GRP2521
Heavy duty Group 1 Half Shaft to suit GRP1 Atlas axle.These shaft are Top Quality Heavy Duty type, as used in our Axle Builds.Overall length 730 mm.18T Diff Spline.Sold per Shaft...
€398.52
Ex Tax:€324.00
Brand: GRP4 FABRICATIONS
Model: GRP2691
Heavy duty FF half shaft to suit GRP4 Fully Floating Atlas axle.These shaft are Top Quality Heavy Duty Tarmac type, as used in our Axle Builds.Overall length 770 mm.18T Diff Spline.Sold per Shaft...
€366.54
Ex Tax:€298.00
-333x222.jpg "Helper Spring *P")
