GRP4 FABRICATIONS

Handbrake pin and E Clips as used in our GRP3080 and GRP3090 Handbrakes.Ø8mm x 38mm long (total length)  Supplied with 2 E clips...

HAND BRAKE PIN 61MM AND E CLIPSØ8mm x 61mm long (total length)..

Alloy Clevis narrow type.40mm longDiameter 19mm5/16" unf thread8 mm hole 8mm wide slotBlack anodisedAs use on our MK1 and Mk2 Escort Hydraulic Pedalboxes..

HANDBRAKE CLEVIS WIDE TYPEAlloy Clevis narrow type.40mm longDiameter 25mm5/16" unf thread8 mm hole12mm wide slotBlack anodisedAs use on our GRP3080 Handbrakes..

HANDBRAKE ROSE JOINT5/16" unf Female Thread.5/16" Bore.Ball Width 11mmLenght form centre of bore to the end of thread 36mmTotal lenght 47.5mm..

HEAVY DUTY CARRIER BEARING FOR 2 PIECE PROPSHAFTBearing ID 30mm2 off M8 mounting bolt holes. 76mm between centres...

2 Piece Motorsport Propshaft with Heavy duty Carrier Bearing for MK1 and MK2 escort.To fit Tractive sequential Gearbox to Atlas Axle.Nominal Lenght: 1340 mm.(Gearbox flange to Axle Flange).Minimum Lenght: 1305 mm.Maximum Lenght: 1370 mm.Atlas flanges on both ends.Front flange to carrier bearing 610m..

This 50-litre (12-gallon) alloy fuel tank supplied with filler tray is a high-quality, GRP4-designed product built for performance. Our unique "Internal Double Edge" construction gives you a tank that is exceptionally strong without adding weight. Fuel Starvation Protection: The ..

  This 50-litre (12-gallon) alloy fuel tank supplied with filler tray with Black Anodised finish is a high-quality, GRP4-designed product built for performance. Our unique "Internal Double Edge" construction gives you a tank that is exceptionally strong without adding weight.Black Anodised..

GRP4 Alloy front Hub kit to suit Mk1 and Mk2 Escorts using Bilstein Type Struts.Manufactured from High Grade Aluminium these Hubs are machined to accept Large outer Bearing and GRP4 Wheel Studs.These GRP4 Hubs increase the Track Width by 10 mm per side.4 X 108 mm PCD Stud pattern.The Kit consists of..

Mk1 and Mk2 Escort Handbrake Cable to suit our GRP3681 Rear Disc conversion kit using the Cosworth Calipers.There will be a small amount of work required to fit this--some mounting points will need to be made on the body to hold the Cables...

The Watts linkage kit is the most effective method to stop unwanted left to right movement of the Axle as the suspension moves up and down.These kits developed for the MK1 and Mk2 Escorts keeps the Axle perfectly centred at all times,providing more predictable and consistant handling.While a Watts l..