Rear Axle components

Lightweight Alloy Atlas Axle Brace.Manufactured by GRP4 Fabrications, this Axle brace bolts onto the rear of the Atlas Axle to help Support the Axle Tubes under rough Rally Conditions.CNC machined to a high Quality Finish from10mm High Strength Aluminium.Supplied with a set of Axle clamps to suit 60..

1" lowering block kit...

1.5" lowering block kit...

2" lowering block kit...

M10 Schnoor WasherSCHNORR® safety washers are in the form of a disc spring but with a trapezoidal cross-section and serrations on both sides. The outer diameter is matched to the head diameter of the pan head and socket head cap screws...

M12 Schnoor WasherSCHNORR® safety washers are in the form of a disc spring but with a trapezoidal cross-section and serrations on both sides. The outer diameter is matched to the head diameter of the pan head and socket head cap screws...

Group 4 wheel Nut.Manufactured in house from High Tensile Steel.Zinc plated. 1/2" unf Thread to suit our GRP4 front and rear studs...

Atlas Axles fitted to Mk1 and Mk2 Escort benefit from this kit as it prevents the Axle Flexing under hard braking or hard Acceleration, It also Enables slight adjustments in toe in/out. Billet machined Bolt on alloy front bracket and Left Hand and Right Hand Threaded Inserts and Rose joints ma..

Atlas Axle Diff Skid.Heavy Duty 3mm steel diff skid to protect underside of Atlas axle on Rough Gravel stages.Bolts onto the underside of the Atlas Axle Housing.Zinc Plated...

English 1/2 Shaft Bearing and Retainer Ring.Half Shaft Bearing for the English Axle as used in Mk1 and Mk2 Escorts.  Bearing Outer Diameter- 62mm.Inner Diameter-30mm.Width 21mm.Fitted with O ring...

English Axle Diff Bearing Rebuild kit.Top quality Koyo/NTN/Fersa Bearings.For English Axles as use in Mk1 and Mk2 Escorts.Kit consists of the following:2 off Side Bearings - GRP24622 off Pinion Bearings - GRP24611 Pinion Front Seal - GRP24571 Crush Washer - GRP2458..

English Axle Diff Bearing Rebuild kitTop quality Timken Bearings.For English Axles as use in Mk1 and Mk2 Escorts.Kit consists of the following: 2 off Timken side Bearings - GRP2464 2 off Timken Pinion Bearings - GRP2463 1 off Pinion Front Seal - GRP2457 1 off Crush Washer - GRP2458..