Brand: Gripper Differentials
Model: GRP2400GT18
This plate type Differential from Gripper has proven itself in top spec Mk1 and Mk2 Escorts, in both Historic and modern Form.This model is set up for Tarmac use with 40/65 Ramp angles and 120Nm preload.The Ramp angles can easily be changed to 30/60 by opening the end cover plate and changing the se..
€1,353.00
Ex Tax:€1,100.00
Brand: GRP4 FABRICATIONS
Model: GRP2401-16T
Gripper Side gears to suit Gripper Atlas LSD.Brand new.Spline 16 Teeth.Sold per pair...
€440.34
Ex Tax:€358.00
Brand: GRP4 FABRICATIONS
Model: GRP2401-18T
Gripper Side gears to suit Gripper Atlas LSD.Brand new.Spline 18 Teeth.Sold per pair....
€440.34
Ex Tax:€358.00
Brand: Gripper Differentials
Model: GRP2405
GRIPPER ATLAS LSD LID ( END PLATE ) ONLY..
€414.51
Ex Tax:€337.00
Brand: Gripper Differentials
Model: GRP2400GTRACTIVE
This plate type Differential from Gripper has proven itself in top spec Mk1 and Mk2 Escorts, in both Historic and modern Form.This model is set up for Tarmac use with 40/65 Ramp angles and 120Nm preload to suit Tractive Half shafts.The Ramp angles can easily be changed to 30/60 by opening the end co..
€1,353.00
Ex Tax:€1,100.00
Brand: GRP4 FABRICATIONS
Model: GRP2560
Quaife Half shaft Wheel FlangeTo suit GRP1 Atlas axle...
€164.80
Ex Tax:€133.98
Brand: GRP4 FABRICATIONS
Model: GRP2561
GRP1 1/2 shaft flange.
Undrilled.Ideal when using different Stud pattern Wheels...
€164.80
Ex Tax:€133.98
Brand: GRP4 FABRICATIONS
Model: GRP2523
GRP1 Half shaft nut and washer.As supplied on GRP2522 and GRP2521...
€29.25
Ex Tax:€23.78
Brand: GRP4 FABRICATIONS
Model: GRP2550
3 mm Steel spacer required when removing the Original Steel Drum Brakes...
€17.63
Ex Tax:€14.33
Brand: GRP4 FABRICATIONS
Model: GRP2570
GRP1 Rear Stub Axle.Billet machined from High Tensile Steel.To suit 1/2 Shaft Bearing Diameter 67mm.The diameter of Locator is 51mm.M8 threads.Sold each...
€76.32
Ex Tax:€62.05
Brand: GRP4 FABRICATIONS
Model: GRP5610
GRP1 Sleeve Nut.Zinc plated sleeve Nut when using GRP4 wheels on GRP1 studs.
M12*1.5mm thread.Total length 48mm.Length of Sleeve 24mm.Diameter of Sleeve 17.8mm21mm Socket required for this Nut.60 degree Taper. ..
€4.55
Ex Tax:€3.70