Full

This universal 4 link box is the ultimate in Strength and reliability.Utilities a 12 mm High Tensile Bolt through a specially developed 50 mm wide Poly bush and triple reinforced side walls.This Universal 4 link box has extended side walls to allow for modification to suit your build, ideal when put..

Watts linkage raised boot floor box.  Used to give clearance for watts cover when extra long rear suspension travel is required. The Alloy fuel tank also needs a pocket taken out of it to suit this.  To be used only  with GRP 5450 (Raised Boot floor)...

Weld in Battery Tray Platform.Swaged Battery Tray Platform for bolting in Battery Tray for PV 25 and PV 30 flat Battery Trays.Designed with Captive nuts and to fit between Link box and Diff Tunnel.(Alloy Battery Tray not included)...

Fuel Pump Bracket Mounting Base. Weld in base with M6 captive nuts for mounting the following Fuel pump kits. GRP4582GRP4583GRP4595GRP4597Welds onto Boot Floor.180mm x 100mm...

Designed by GRP4 Fabrications to keep the Wiper pressed against the Windscreen at High Speed.Black anodized Aluminium.Sold per 1 piece.Dimensions: 196mm x 52mm x1.5mm..

Camber Shims to suit GRP4 Modular Strut Tubes for easy adjustment of Camber.5 types to adjust camber at 0.5-degree increments.Dimensions 22.8 x 17.8mmTo suit M12 mm bolts.20 shims  ( 5 increments x 4 of each )Zinc plated steelNot suitable for Reiger Dampers..

To suit diameter 38 mm Pipe...

To suit diameter 38 mm Pipe...

ZF clutch fork pivot pin.M10 thread.Supplied with M10 Nyloc nut...

ZF Gearbox mounting bracket.Bolts to the Bottom of the ZF Gearbox and will fit into our GRP4040 Rubber mount...

ZF Dog leg Nylon Retro style Gearknob with pattern machined on top in yellow.With rubber o ring surround. M10*1.5mm thread...

ZF release bearing carrier and bearing and O rings.Consists off:1 off Zf release bearing carrier1 off Clutch Release Bearing - GRP59301 pair ZF STEEL RELEASE BEARING CARRIER O RINGS - GRP5781..