Full

GRP4 GEARBOX MOUNT AND RUBBER.190mm x 34mm between mounting slot centres.Fitted with  GRP4040 HD mounting rubber...

Steel Tank Platform.Steel Tank platform to suit our Alloy shaped fuel tanks.Welds into the boot floor of the Mk1 and Mk2 Escorts.Supplied with steel tank straps...

Steel Tank Platform.Steel Tank platform to suit our  Injection Alloy shaped fuel tanks.Welds into the boot floor of the Mk1 and Mk2 Escorts.Please select from the optionsRHS - ( Most common)  The swirl pot  hole is on the RHS (as looking into the boot)LHS - ( Uncommon ) The ..

Weld on Steering arm strenghtening kit suitable for RS2000 and Capri Steering arms.As used in our GRP4 Gusseted Steering arms.Kit consits of :2 off Heavy duty Steel strenghtening gussets2 off Steel sleevesSold per Arm...

Steering end adaptor. High tensile steering rack extension for rose-jointing steering rack ends. M14 x 2.0 to 5/8"unf LH.67mm long...

Steering end adaptor plus 1" High tensile steering rack extension for rose-jointing steering rack ends. M14 x 2.0 to 5/8"unf LH.93mm long...

Steering end adaptor plus 2". High tensile steering rack extension for rose-jointing steering rack ends. M14 x 2.0 to 5/8"unf LH.120mm long...

Steering rack extension. High tensile rack extension (Ideal for wide track front suspension using Ford TRE.(M14 x2mm threads). This will add a minimum 20 mm /side.Sold per side...

Steering Rack support plate and Screws.Prevents unnecessary side ways movement of rack on X member. Bolts onto Cross Member and Tack Welds onto Steering rack.Zinc plated.Kit consists of:1 off zinc plated Bracket3 off M16 x 16 Button head SHCS3 off M6 Nyloc nuts - GRP8005..

Sunbeam alloy front hub kit to suit GRP4 studs and GRP4 nutsThis hub has a +10mm offsetwith bearings,seals, GRP4 studs and nuts. alloy grease caps...

Alloy front Hub kit to suit Talbot sunbeamThese Hubs are 10mm wider than Standard Steel hubs to accept Monte Carlo Brakes.Manufactured from High Grade Aluminium these Hubs are machined to accept M12 Studs and Wheel nuts.4 X 108 mm PCD Stud pattern.The Kit consists of:2 off Sunbeam alloy hubs +10mm -..

GRP4 Alloy Front Hub(Sunbeam) Billet machined from 6082T6 aluminium Drilled Ø12.5mm to suit GRP1 Studs.(10mm wider to accomodate Monte Carlo brakes)    ..