Search

1/2 UNF x 5" Hex Bolt Zinc coatedAs used in our Alloy Toe clamp..

Schnoor Washer to suit GRP3420...

Bolt for Rear FF bell...

4 Link fitting kit for GRP4 Fabrications Wide 4 Link kit (GRP1970).This kit uses 2 Piece Heavy duty Polyurethane Bushes and Steel Sleeves.Bushes are 50 mm wide with 12mm Bolt holes for extra durability.Kit comprises of the below:4 off 5/8" x 1/2" XM8T Aurora Rose joint -GRP50804 off 5/8" unf right h..

4 Link Kit for Mk1 and Mk2 Escort.The 4 link kit is an upgrade for classic Mk1 and Mk2 Escorts, significantly improving rear suspension geometry, traction, and handling.It replaces the standard leaf spring setup in the rear of a Mk1 or Mk2 Escort with four Link bars that precisely control the moveme..

AE 86 TENSION STRUT BODY BRACKETS / PAIR Heavy duty Tension body brackets for use with our special Tension kit (GRP1855 - Sold seperately)  Not for use with standard AE86 tension barsKit Consists off:1 off Tension Body Bracket- Left side.1 off Tension Body Bracket- Right side.2 off ARB Spacer..

Alloy Tank Platform.Lightweight Aluminium Tank platform to suit the Escort Alloy shaped fuel tanks.Bolts into the boot floor of the Mk1 and Mk2 Escorts.Please select from the optionsRHS - ( Most common)  The swirl pot  hole is on the RHS (as looking into the boot)LHS - ( Uncommon ) The swi..

Pack of Brake Disc to Bell mounting bolts and nuts.12 bolts/nuts per kit.CP3845-101k12..

Ap Rear Bell.To suit Fully floating Axle and AP 290 x 21mm Disc.177.8mm pcd 12 Bolt pattern.Holes are threaded 1/4" unf...

Ford Escort Mk1 and Mk2 Historic Spec Brake kit.Forest spec AP Calipers machined to Suit GRP4 Front Strut with 264 x 21mm AP Brake Discs.Kit consists of:1 off CP2361-96S4QR-RH - GRP3494RH-machined1 off CP2361-97S4QR-LH - GRP3494LH-machined2 off CP4136-208G4-264*21mm vented Discs ..

Atlas Axle Differential Bearing and seal kit.Kit consists of the following:2 off NTN Side Bearings- GRP2430 1off Timken front Pinion Bearing - GRP24401off Timken rear Pinion Bearing - GRP2450 1off Atlas Pinion Front oil Seal - GRP2452 1off Atlas Crush Washer - GRP2453All Top Quality Component..

ATLAS PINION SHIM.Precision ground shim for adjusting Pinion Depth on atlas Axles.1.1mm thick.(0.043" Inch)...