Shell Fabrication parts

Steel Tank Platform.Steel Tank platform to suit our  Injection Alloy shaped fuel tanks.Welds into the boot floor of the Mk1 and Mk2 Escorts.Please select from the optionsRHS - ( Most common)  The swirl pot  hole is on the RHS (as looking into the boot)LHS - ( Uncommon ) The ..

Tank Strap to suit our steel tank platform.Sold per Strap...

Tractive gearbox rocker bracket.Welds onto Tunnel...

This universal 4 link box is the ultimate in Strength and reliability.Utilities a 12 mm High Tensile Bolt through a specially developed 50 mm wide Poly bush and triple reinforced side walls.This Universal 4 link box has extended side walls to allow for modification to suit your build, ideal when put..

Watts linkage raised boot floor box.  Used to give clearance for watts cover when extra long rear suspension travel is required. The Alloy fuel tank also needs a pocket taken out of it to suit this.  To be used only  with GRP 5450 (Raised Boot floor)...

Weld in Battery Tray Platform.Swaged Battery Tray Platform for bolting in Battery Tray for PV 25 and PV 30 flat Battery Trays.Designed with Captive nuts and to fit between Link box and Diff Tunnel.(Alloy Battery Tray not included)...

Fuel Pump Bracket Mounting Base. Weld in base with M6 captive nuts for mounting the following Fuel pump kits. GRP4582GRP4583GRP4595GRP4597Welds onto Boot Floor.180mm x 100mm...

To suit diameter 38 mm Pipe...

To suit diameter 38 mm Pipe...

Drill Jig for drilling the FIA Seating mounting Kits.Simply Clamps on.Supplied with 14mm Drill bit.Designed to make fitting of the Seat mounting kits easier...

FABRICATED Mk1/Mk2 ESCORT GEARBOX MOUNTING BRACKET Ideal when mounting Gearbox in MK1 and MK2 Escort.Fitted with M10 threaded inserts.Distance between centers of threaded Inserts 34mm.92.3 x 79 x 38 mm Sold per Bracket..

Universal Weld In Seat Rail Mounting / Subframe Kit - FIA and MSA / MSUK approved type.The correct kit as per latest FIA & MSUK spec and drawings.This is the Motorsport Ireland approved Seat mounting kit for all NEW Rally Car builds.35 mm Seamless tubes ready to be drilled to suit your seat moun..