Full

 GRP4 rear turret Bracket.Includes Reinforcment Washer and weld Nut.Bolt Hole center is 32 mm from top of Axle Tube. ..

AE86 Adjustable Tension rod adjuster5/8 RH thread to 3/4" LH ThreadLength 111mm..

Grp4 wheel insert. Used when converting  wheels to accept GRP4 studs.Total Height 27mm.Head height 9.5mm.Head Diameter 31.5mm.Shank Diameter 23.18mm...

3/8" UNF High Tensile Socket Head Bolt,3" Long.With Double Nuts to suit our Gusseted Steering arms...

This kits follows the recommendations by HANS manufacturers of mounting the Harnesses at an angle between 0 and 20 degrees to the Horizontal. The job of this kit is to span across(weld and bolt on) the two rear roll cage stays and provide a secure anchorage point for the harnesses while c..

Harness eye backing Plate.Used to firmly bolt your harness mounting eye bolts in position. These back plates, help spread any loads through a larger area of floor pan or panel they are mounted behind.Made from tensile steel and Zinc plated finish.Size 55 X 55 mm.7/16" UNF Thread...

Heavy Duty 4 Link Kit (wide Bush type) for Mk1 and Mk2 Escort.The 4 link replaces the standard leaf spring setup in the rear of a Mk1 or Mk2 Escort with four Link bars that precisely control the movement of the rear axle. This design offers far greater control over axle articulation, anti-squat, and..

HD TCA ADJUSTER.M24*1.5 LH external thread with 5/8 unf internal thread. Total lenght 55mm.M24*1.5 LH external thread --45mm long5/8 unf internal thread --35mm longAs used in our GRP1074 range of Heavy duty Track Control arms..

HD TCA ADJUSTER +1inch.M24*1.5 LH external thread with 5/8 unf internal thread.Total length 80mm.M24 External thread length --45mm long5/8 unf internal thread length --30mm longAs used in our GRP1074 range of Heavy duty Track Control arms..

HD TCA ADJUSTER +2inch.M24*1.5 LH external thread with 5/8 unf internal thread. Total length 105mm.M24*1.5 LH external thread lenght-- 45mm long5/8 unf internal thread length-- 35mm longAs used in our GRP1074 range of Heavy duty Track Control arms and our GRP1030 Instu TCA kits...

MK1 & MK2  Heater control switch panel.Lightweight Alloy Switch panel which mounts where the original Heater controls are.Angled towards the driver to allow for clear view and reach of Switches and Gauges.TIG welded and Black Powder coated.Dimensions 280 x  75mm...

MK1 & MK2  heater control switch panel. Angled switch panel which mounts where the original Heater controls are. Tig welded.Dimensions 280 x  75mm.Aluminium finish...